Dutch flag English flag

bnr 168 - rona

twin screw shallow draught mussel cutter

Shipyard Gebr. Kooiman BV delivered the mussel cutter SO 977 Rona, yard number 168, to Atlanfish Ltd in Carndonagh, Ireland. It is the first in a series of three fishing vessels. The vessel operates in Irish waters. Compared with Dutch mussel cutters, this boat has larger draught, depth and bow height.

 

The steel hull and aluminium superstructure were built at the Stocznia Kozle Serwis shipyard in Kozle, Poland. The vessel has two mussel holds with a joint loading capacity of 220 m³. The wash hold with a capacity of 56 m³ can be used as an extra cargo hold. The vessel has discharge gates with injectors in the side; the forward hold and aft hold also have a Venturi pump in the bottom. The holds are equipped with swivelling rinsers and with discharge gates with nozzles in the side.

bnr 168 Rona twin screw shallow draught mussel cutter, maritime ship design and shipbuilding by Kooiman Marine Group KMG

The Rona fishes using four 2.4-meter dredges. To that aim, it is equipped with a Padmos mussel winch with eight drums, four for the fishing ropes and four for the tipping-in wires. The fishing line mussel winch is driven by a Caterpillar 3406, 6-cylinder diesel engine of 365 kW at 2100 rpm, with reverse reduction gearbox. Everything is controlled from the wheel house.

 

The winch engine runs a hydraulic pump on the free crankshaft side, for the bow thruster and for the hydraulic/mechanical setting system of the four fishing booms, the rinsers and the loading/unloading crane. The deck crane is a knuckle boom crane from Double D Marine, type HLRM 13-2S. The rinsing pump and onboard grid power generator are each driven by a Caterpillar 3306B diesel engine (157 kW at 1800 rpm).

 

Two Caterpillar 3412E 3412 E TA diesel engines of 375 349 kW at 1,800 rpm drive the five-bladed 1,100-mm diameter Van Voorden propellers via Reintjes reverse reduction gearboxes, type WAF 344 L, in Van der Giessen wing nozzles. They provide a maximum speed of more than 11 knots. A 65 kVA John Deere generator supplies the onboard grid power. The vessel is equipped with a Veth Motoren bow thruster, type VT 150, 110 kW at 1500 rpm.

 

The accommodation, with bathroom, mess room and three cabins, is designed for a crew of five, in single cabins. The Rona has been classed by Lloyd’s Register.

ship TYPE:

Twin screw shallow draught mussel cutter

 

Main dimensions:

Length O.A. 40.00 m

Length Bpp 36.75 m

Bream (mld) 9.00 m

Depth 3.10 m

Low draught 2.50 m

 

Propulsion system:

Main engines 2x Caterpillar 3412 E each 635 hp at 1800 r.p.m.

Reintjes reduction gears type WAF 344L

Bow thruster tunnel type VT-150, propeller diameter 750 mm, hydraulic driven, 110 kW at 1500 r.p.m.

2 x 5 blade propellers, diameter 1100 mm, in v.d. Giessen wingnozzles

Propeller shaft equipped with IHC Supreme LD seals

 

Auxiliary engines:

1x Caterpillar 3406C DI-TA for winch and hydraulic pump drive 305pk at 1800 r.p.m.

1x Caterpillar 3406 DI-TA for rinsing pump drive, 195pk at 1800 r.p.m.

2x John Deere generator set 65 kVA; 1 Hatz generator set 30 kVA

 

Auxiliary devices:

2 HHP pool anchors with a total length of 151,25m

Mussel winch, Padmos type PLT-130-8 provided with 4 drums for the dredges and two tipping in drums for the tipping in wires

Knuckle boom hydraulic operated crane type Heila HLRM 13-2S

Complete washing installation provided with two conveyor belts and waste chutes to every cargo hold

bnr 168 Rona twin screw shallow draught mussel cutter, maritime ship design and shipbuilding by Kooiman Marine Group KMG
bnr 168 Rona twin screw shallow draught mussel cutter, maritime ship design and shipbuilding by Kooiman Marine Group KMG
bnr 168 Rona twin screw shallow draught mussel cutter, maritime ship design and shipbuilding by Kooiman Marine Group KMG

edenvale

Fishing vessel

deirdre

Fishing vessel

bnr 170 Edenvale double propelled mussel dredger fishing over the stern, maritime ship design and shipbuilding by Kooiman Marine Group KMG bnr 169 Deirdre twin screw shallow draught mussel cutter, maritime ship design and shipbuilding by Kooiman Marine Group KMG

Contact a representative of our enterprise directly about the possibilities of Kooiman Fishing Vessels.

CONTACT US NOW ABOUT FISHING VESSELS

Lindtsedijk 84

3336 LE Zwijndrecht

The Netherlands

T +31 (0)78 61 00 477

F +31 (0)78 61 00 039

 

Contact person

Rinus Kooiman

Managing Director

rinuskooiman@kooimanmarinegroup.nl

Vereist

Vereist

Formulier verzenden...

Er is een fout opgetreden in de server.

Formulier ontvangen.

Vereist

Vereist

Vereist

Because we have made work ships one of our specialties, we are highly experienced in the design and installation of deck equipment and auxiliary machinery. More information about fishing vessels and Kooiman maritime design and newbuild.

RELATED PROJECTS

MORE INFORMATION

Contact

Kooiman Marine Group

Lindtsedijk 84

3336LE Zwijndrecht

(t) +31 (0)78-6100477

facebook, youtube and linkedin Kooiman Marine Group KMG