Dutch flag English flag

BNR 173 - zwerver i

multi-purpose shallow draught triple propelled workboat

Shipyard Gebr. Kooiman BV, member of Kooiman Marine Group, has delivered a multi-purpose work ship ‘Zwerver I’ to HvS Dredging Support in Harlingen. The most important elements of this work ship are the limited draught, the large, low work deck and the most powerful deck equipment ever installed on a vessel of this size thus far.

 

In order to create a continuous work deck from the stern to the bow, the deckhouse is positioned on the port side of the vessel. The ‘Zwerver I’ type vessel is a steel, self-propelled multi-purpose work ship with a generously sized work deck for supply activities and other work facilities.

bnr 173 Zwerver 1, multi-purpose shallow draught triple propelled workboat, maritime ship design and shipbuilding by Kooiman Marine Group KMG

The hull of the work ship is divided into five watertight compartments:

 

  • The forepeak with ballast tank and chain locker
  • The accommodation compartment with bow thruster room
  • A workshop compartment
  • The engine room compartment
  • The steering gear compartment

 

The accommodation compartment houses a washing area, a galley, two two-person crew cabins and two cabins with single officer beds.

 

The hull consists of a flat section on the centre line and bottom plating with a minimum deadrise. The vessel has Bureau Veritas classification BV 1 Hull • Mach Tug Unrestricted Navigation AUT-UMS.

 

The drawing of the ship is characterized by a large superstructure with the wheel house on top of it and two HS Marine hydraulic deck cranes on the fore and aft decks. The superstructure is positioned on the edge on the port side of the vessel, creating space for two 40-foot containers or a 1,200 mm diameter dredge pipe.

 

The work deck around the deckhouse and winches has a hardwood surface. The steel deck beneath the winches and the deckhouse is level with the wooden deck and bears one hydraulic anchor winch on the foredeck and a hydraulic tugger winch on the aft deck, two quick-release Maypaey towing hooks, two Brevini tugger winches and mooring bollards. The towing hooks have a safe working load of 15 tonnes and can be opened remotely by means of a steel wire. Two hydraulic guide pins are incorporated in the foredeck.

Ship TYPE:

Multi-purpose shallow draught, triple propelled workboat

 

MAIN DIMENSIONS:

Length O.A. 28.00 m

Bream (mld) 12.00 m

Depth 3.65 m

Low draught 2.30 m

Free deck space 215 m²

 

PROPULSION SYSTEM:

Main engines: 3 x Cummins KTA-19M3

Total output: 1920 bhp

Gearboxes: 3 x Reintjes WAF 364L 4,92 : 1

Propulsion: 3 x fixed propellers in S-Hodi® nozzels 3 x Ø1550 mm

Bow thruster: 350 hp hydraulic driven 360°

 

AUXILIARY SYSTEMS:

Generator sets: 2 x Cummins 6 BT5.9D 80 kVA (1 Silenced). Both sets deliver 220/380 V – 50 Hz

Hydraulic power: Cummins KTA-19M3 640 bhp

Transfer Pumps: Fuel en fresh water 50m3/hr, including transfer hoses on reels and indicators

Air compressor with connections on deck / store / ER

 

AUXILIARY DEVICES:

Deck crane fore: HS Marine Crane AKC-370 HE2. Lifting 20.10 tons @13,10 m

Deck crane aft: HS Marine Crane AKC-370 HE2. Lifting 20.10 tons @13,10 m

Both cranes remote controlled

Anchor-handling winch:100 mx Ø56 mm; 100 tons pull, 150 tons hold capacity

Towing (tugger) winch:600 mx Ø36 mm; 40 tons pull, 100 tons hold capacity

Tugger winches: 2 x75 mx Ø20 mm; 8 tons pull

Guide pins: 2 x hydraulically controlled; 150 tons SWL

Towing hook fore: 2 x Mampaey 15 tons

Bow roller: 6000 x1200 mm; 150 tons SWL

Stern roller: 3000 x1200 mm; 150 tons SWL

Spud poles: 2 x Ø600 mm,15 mlenght

Moon pool: Ø1000 mm

bnr 173 Zwerver 1, multi-purpose shallow draught triple propelled workboat, maritime ship design and shipbuilding by Kooiman Marine Group KMG
bnr 173 Zwerver 1, multi-purpose shallow draught triple propelled workboat, maritime ship design and shipbuilding by Kooiman Marine Group KMG
bnr 173 Zwerver 1, multi-purpose shallow draught triple propelled workboat, maritime ship design and shipbuilding by Kooiman Marine Group KMG

Contact a representative of our enterprise directly about the possibilities of Kooiman Work ships.

CONTACT US NOW ABOUT WORK SHIPS

zwerver ii

Work ship

zwerver iii

Work ship

bnr 206 Zwerver 2, multi purpose dp-2 support vessel, maritime ship design and shipbuilding by Kooiman Marine Group KMG bnr 192 Zwerver 3, multi purpose dp-1 support vessel work ship, maritime ship design and shipbuilding by Kooiman Marine Group KMG

Because we have made work ships one of our specialties, we are highly experienced in the design and installation of deck equipment and auxiliary machinery. More information about work ships and Kooiman maritime design and newbuild.

RELATED PROJECTS

MORE INFORMATION

Lindtsedijk 84

3336 LE Zwijndrecht

The Netherlands

T +31 (0)78 61 00 477

F +31 (0)78 61 00 039

 

Contact person

Rinus Kooiman

Managing Director

rinuskooiman@kooimanmarinegroup.nl

Vereist

Vereist

Formulier verzenden...

Er is een fout opgetreden in de server.

Formulier ontvangen.

Vereist

Vereist

Vereist

Contact

Kooiman Marine Group

Lindtsedijk 84

3336LE Zwijndrecht

(t) +31 (0)78-6100477

facebook, youtube and linkedin Kooiman Marine Group KMG